 |
Testimonial by Eflightpacks.com |
 |
"This swashplate definitely worth the money. Beautiful craftmanship and precision make this an excellent buy. I'm sure glad I bought one. Not only that, Andy is a great person to work with. As a matter of fact, I'm the US distributor of Andy's products. :o) "
By Tony La, Eflightpacks.com
USA..
Visit Site... |
|
|
| |
| |
Testimonial by By Nigel Tree |
|
"Hi Andy,
By the way the tail gearbox works very very well; the corrected location for the pitch slider bellcrank pivot position so that you get the correct geometric alignment realy helps the gyro to work much better.
Regards Nigel"
UNITED KINGDOM..
Visit Site... |
|
|
| |
| |
Testimonial by By Dan Walkowski |
|
"Thanks Andy, I got the package last night. The tail gearbox is a work of art. I am going to try to get it rebuilt and ready to fly this weekend. I hope this solves my vibration problems once and for all!"..
Visit Site... |
|
|
| |
| |
Testimonial by By William Maizner |
|
"Dear Andy,
I have been using your new gear case and I am impressed with its quality, light weight, good looks and ease of assembly. It is super smooth. I use speed up gears with no problems what so ever. I use a carbon fiber shaft cut to 38mm and still have no vibrations. It was somewhat difficult to install the drive shaft without bending the aluminum supports but I easily fixed that problem by supporting the bearing with a 7mm deep-well socket and tap the shaft lightly in. I also purchased your one-way. It is so easy to install! It is a perfect fit. It runs very true and is also very smooth. I am impressed by all of your products and my friends are impressed of my Hornet thanks to you. Now I cant wait for your new hub! Thanks.
Regards,"..
Visit Site... |
|
|
| |
| |
Testimonial by By Charles S. Baldassano |
|
"Thank you Andy,
I did receive the package from fed-ex, We had a very windy day here in NY the other day and the fed-ex guy "hid" the package in a spot I wouldn't ordinarily look for it, it arrived on time, I just didn't realize where he put it.
By the way the gearbox is amazing, truly a work of art.
Keep up the good work
Your friend"..
Visit Site... |
|
|
| |
| |
Testimonial by By Andy Pocock |
|
"Hi Andy
The red bits arrived today. What can I say? Miniature engineering at it's best. The swash is amazingly precise and smooth. Even my wife took an interest, she likes small, pretty things but has never looked at a helicopter part before.
I've got the parts installed and I'll fit the Hacker tomorrow. Can't wait to run this one up.
Thanks again for everything and if you decide to build aluminium head I'll take one in red!
Best regards"..
Visit Site... |
|
|
| |
| |
Testimonial by By Matthias Gottmann |
|
"Andy,
...The parts arrived and they look fabulous! They are masterpieces!...
The autorotation gear installed easily and runs very smooth...
...I was stunned! Up to now there had been no point in "trimming" the helicopter. Flying was a permanent correction on three axis. I almost got used to that. :) With the Al swashplate I can trim the heli to sit still for seconds at a time. Flying is so much more enjoyable and relaxing now! Thanks for providing tuning parts of outstanding quality and value!...
It was a pleasure doing business with you. Please keep me updated when new tuning parts become available!"..
Visit Site... |
|
|
| |
| |
Testimonial by By Nigel Tree |
|
"Hi
i got my 120 swashplate from Andy Nguyen this morning and what a little jewel it is; all i need now is my MS CP upgrade and away i go.
It is beautifully made and lokks fabulous i cant wait to try it in a CP Hornet. Given that the CP upgrade to the Pic transformed its flight characteristics and thats with the standard sloppy swash with no ball joint etc i iamagine that this swash of Andys on the Hornet will turn it into a true miniature heli which really will be usefull as a training aid let alone for its own fun factor.
Anyhow i just wanted to publicly say brilliant work Andy."..
Visit Site... |
|
|
| |
| |
Testimonial by By Arnaud Stephann |
|
"I got mine too, and the swasplate does look beautifull.
Good job Andy, thanks again!
The patience pay sometime."..
Visit Site... |
|
|
| |
| |
Testimonial by By Glenn |
|
"I have one of Andy's 90 degree swashplates. It is a beauty. The maching is top notch and I am sure you will find it was worth the wait. I will install it this weekend and report back."..
Visit Site... |
|
|
| |
| |
Testimonial by By Cesar White |
|
"Hi Andy,
Wow!!!!!. I got my sw and ar today and are awesome. Very nice work you did I am impress. Thank you, the wait time was worth it.
Looking forward to the CNC tail box... put me in your list for one of those.
Thanks again Andy"..
Visit Site... |
|
|
| |
| |
Testimonial by By David Kucera |
|
"Andy, my swashplates came in last week. I got one 90 degree and one 120 degree. Both are beautiful and feel silky smooth! I showed one to my girlfriend and she said it would make a pretty necklace! No, I am not going to let her convert it into a necklace.
Thanks again Andy, it was worth the wait."..
Visit Site... |
|
|
| |
| |
Testimonial by By Anthony Yoohanna |
|
"it was well worth the wait for me the swash is really nice and it has greatly improved stability."..
Visit Site... |
|
|
| |
| |
Testimonial by By Alastair D. M. Brain |
|
"Andy!
Swash plate and anti-rotation support recieved. Excellent piece of engineering!
Thanks again, and keep up the good work."..
Visit Site... |
|
|
| |
| |
Testimonial by By Trevor White |
|
"It came today!
Beautiful to look at, Perfectly free with zero play or binding.
Thanks a lot Andy.
Regards,"..
Visit Site... |
|
|
| |
| |
Testimonial by By Rowland Mosher |
|
"I received my parts from Andy today and they are really small jewels. Can't wait to get them installed."..
Visit Site... |
|
|
| |
| |
Testimonial by By Roy |
|
"I have Andy's and I will never use anything else (seen both @ work). Especially with the upcoming addition of the connections rods (FOR CP)."..
Visit Site... |
|
|
| |
| |
Testimonial by By Sean Levy |
|
"I did test Andy's and I can tell you that it is a work of art, from the side openings to the custom connection rods; this Swashplate is the heart of the helicopter and the 650 hours Andy spent on this product translate directly to a flawless Jewel with no bindings and awesome tilt.
Thank you Andy."..
Visit Site... |
|
|
| |
| |
Testimonial by By Jose Carlo |
|
"Hello Andy
Here is a link to my Micro and I have posted lots of pics. http://www.rcgroups.com/forums/showthread.php?s=&threadid=65051 ...I'd just like to say that the rotor head is extremely precise with your mods making my heli is a pleasure to fly.
Check it out http://www.hornet-heli.com/ubb/Forum3/HTML/003161.html ...I have preformed autos with this heli and they are easy to do because the blades have so much momentum and your one way is extremely smooth :)
Keep up the good work."..
Visit Site... |
|
|
| |
| |
Testimonial by By Gary Murphy |
|
"hello andy.
just to let you know my order no. 20020087 arrived today.9.00am thur 10th oct.both parts are excelent,they do you credit.i will order from you again,and would recomend you to any one.has i said the quality is excelent and they arrived quicker than some uk model shops.thanks for a good service."..
Visit Site... |
|
|
| |
| |
Testimonial by By Hans Gethoffer |
|
"Hi Andy,
I just want to let you know that I received both shipments. The parts - swashplate with accessories and auto-rotation hub - are engineered and machined for perfection. And they look great in anodized blue. I do a little bit of machine work myself, but building such a perfect swashplate is way beyond my capabilities. I'm looking forward to new machined upgrade parts for micro helis from you!
Thanks,"..
Visit Site... |
|
|
| |
| |
Testimonial by Nigel Tree |
|
Hi Andy,
BRILLIANT, SUPERB, WORTH ITS WEIGHT IN GOLD, AMAZING
Your tail rotor hub has totally transformed my Hornet. It has gone from being a vibrating unpredictable beast to a fabulous smooth micro-heli which I can fly instead of just fighting it.
I realy do believe that this is the one upgrade that has made the most usefull improvement of them all - maybe I have been unlucky with with my stock tail parts but the vibration they were causing (even though I did my best to get them balanced) made my hornet almost unflyable because the gyro (CSM 400) just could not cope with the level of vibration.
WELL DONE ANDY...
Visit Site... |
|
|
| |
| |
Testimonial by Dan Pressman |
|
Hey Andy! Long time no talk. This is Lazer from the hornet bbs. I haven't been on very much lately due to circumstances beyond my control. I remembered we were talking about your design for a new CNC tail for the hornet and I just looked at your site! Amazing! The finished CNC tail and gear case together look like the way the hornet was meant to be flown :) Great Job!!
When do you think you will have the Precision tail rotor and gear case back in stock?
My bellcrank just mysteriously broke so I am grounded for the moment :) More time to check out your new site.
Regards,
dp..
Visit Site... |
|
|
| |
| |
Testimonial by William Detcher |
|
I just received my Precision Tail Gear Case for my Zoom 400 and I just wanted to say
that I'm very impressed with the quality (and it came in very nice packaging!) I
can't wait for you to release the Tail Pitch Slider and Bell Crank to go along with
it.
Thanks,
Bill
Aug 28, 2004..
Visit Site... |
|
|
Top » Home
MICROHELI - VORTEX 200 PRO
Instructions
