Advanced X Frame (RED) - BLADE NANO CPS
 

Advanced X Frame (RED) - BLADE NANO CPS

$49.99
Brand:
Product Code: MH-NCPS105X
Viewed

Product Description

The Advanced X Frame is specifically designed to optimize for rigidity, stability, durability and overall performance of the Blade Nano CP S helicopter.

The new design is an incredibly strong and virtually indestructible frame from the perfect combination of Aluminum, Carbon Fiber and Delrin materials to form the best rigid block, to bring long-term durability and the best technical features; without any issue with bend, vibe or wag during flight. It is directly replaced the stock plastic.

The Advanced X Frame gives you the easy servo assembly installation and removal ever; provides a rigid platform and firm hold of tail boom with the frame; significantly reduces tail vibe or tail wag during flight; and can utilize extra option for brushless motor.

More than that, this new upgraded product can be set up in 2 configurations:

Configuration 1: Stock Swashplate + Stock Linear Servos

The Servo is arranged like the stock configuration. In this regard, you can utilize the stock swashplate with anti-rotation pin on the left of the frame and white plastic anti-rotation guide. With this configuration, you will save cost without needing to buy extra Microheli swashplate. However, performance of the flight is not much better than the stock at all. The stock swashplate is tilted to the right or left easily when taking cyclic order to make the helicopter forward and backward.

Configuration 2: Microheli Swashplate + Stock Linear Servos (Cyclic servo is turned towards the inner side of the frame)

Anti-rotation guide is installed behind the frame with anti-rotation pin which is on the same flat surface with ball linkage plate, combining with Microheli swashplate. The Microheli swashplate will go around center ball not to be tilted at all when taking cyclic order to the right or left, forward or backward. Cyclic servo is turned towards the inner side of the frame, and you must utilize three straight linkages to ensure precision and synchronism when the swashplate moves to cyclic order given. You can buy extra Servo Pushrod with Ball Links (Product Code: BLH3308).

Motor mount allows you to replace pinion and adjust distance of center pinion and main gear easily. The Advanced X Frame is technically re-engineered the third extra ball bearing between two main ball bearings of main shaft, to significantly increase in main shaft rigidity and ball bearing system durability of the frame. Mainboard is kept absolute firmly on the frame with four stock rubber dampers, to reduce unreal vibes transmitting to gyro during flight. Canopy mount design gives you the easy replacement in case of crash. Aluminum Motor Mount is only designed to dissipate and prevent the stock motor overheating (to no effect to upgrade motor).

 

  Includes
1 x Advanced X Frame
Hardwares

 

  Materials
Aluminum
Carbon Fiber
Delrin

 

  Features
Optimizes for rigidity, stability, durability and overall performance
Incredibly strong and virtually indestructible frame from the perfect combination of Aluminum, Carbon Fiber and Delrin material to form the best rigid block, to bring long-term durability and the best technical features; without any issue with bend, vibe or wag during flight
Gives you the easy servo assembly installation and removal ever
Provides a rigid platform and firm hold of tail boom with the frame
Significantly reduces tail vibe or tail wag during flight
Can utilize extra option for brushless motor
Can be set up in 2 configurations: Stock Swashplate + Stock Linear Servos/ Microheli Swashplate + Stock Linear Servos (Cyclic servo is turned towards the inner side of the frame)
Motor mount allows you to replace pinion and adjust distance of  center pinion and main gear easily
Technically re-engineered the third extra ball bearing between two main ball bearings of main shaft, to significantly increase in main shaft rigidity and ball bearing system durability of the frame
Mainboard is kept absolute firmly on the frame with four stock rubber dampers, to reduce unreal vibes transmitting to gyro during flight
Canopy mount design gives you the easy replacement in case of crash
Aluminum Motor Mount is only designed to dissipate and prevent the stock motor overheating (to no effect to upgrade motor)
Unique and stylish Advanced X Frame design

 

  Weight
4.75g

 

  Usage
For Blade Nano CP S

 

  Requires
Read and follow the Assembly Instruction carefully
Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution
Basic hand tools

 

  Instruction
Manual and Instruction included

 

Blade Nano CP S is a registered trademark of Horizon Hobby, LLC

Write a review

Note: HTML is not translated!
    Bad           Good
There are no notes for this product.