Aluminum/Carbon Fiber Main Frame - BLADE 180 CFX
 

Aluminum/Carbon Fiber Main Frame - BLADE 180 CFX

$62.99 $89.99
Brand:
Product Code: MH-18FX005
Viewed

Product Description

The design of the Aluminum/Carbon Fiber Main Frame was to optimize for rigidity, stability, durability, and overall performance of the Blade 180 CFX helicopter. It is compatible and easily replaced the stock frame parts.

The new upgraded product consists of incredibly strong Carbon Fiber plates, held together by the Aluminum parts and posts. With the combination of Aluminum 7075, Aluminum 6061-T6 and Carbon Fiber materials will form the most rigid block and far superior than the stock. This results in maximum stability and long-term durability.

The new design featured:

-The Aluminum Tail Boom/Servo Mount: Brings the best tail control performance, CNC machined from Aluminum material for a rigid platform & firm hold of Tail Boom. The Aluminum Servo Mount Support can be removed and replaced with the Aluminum Tail Servo Mount (Product Code: MH-18FX021) for better tail control authority and higher center gravity on the Blade 180 CFX helicopter (Product Code: MH-18FX005M).

-The 7075 Aluminum Main Shaft Bearing Block: Optimized for rigidity, stability and durability, utilized more powerful and thicker Radial Bearings than the stock ones (Product Code: MH-18FX005MB).

-The 7075 Aluminum Bottom Frame: Prevents unwanted Receiver loosening during flight when setting up on the stock plastic bottom frame (Product Code: MH-18FX005BF).

-The 7075 Aluminum Battery Tray: Prevents unwanted Battery and ECS loosening during flight when setting up on the stock plastic battery tray (Product Code: MH-18FX005BT).

-The Carbon Fiber Main Frame set: Prevents the side frame deflection, yields an accurate and crisp flight feeling for all flying styles. We also made the space where the battery is mounted larger, to allow you to use longer and thicker battery sizes, due to the Carbon Fiber Main Frame set design gives more tilt angle of 10 degrees than the stock main frame set (Product Code: MH-18FX005MF).

-The Aluminum Canopy Mount set: CNC Aluminum material which brings a rigid platform and firm hold of canopy, direct-replacement of the stock plastic (Product Code: MH-18FX005CM).

-The Aluminum/Carbon Fiber Anti-Rotation Guide set: machined with precise CNC tolerances from Aluminum, Carbon Fiber and Delrin material to gain the best precision. With an extra trench at the bottom of Aluminum anti-rotation bracket specifically designed for keeping the Aluminum/Carbon Fiber Anti-Rotation Guide set very close to the Main Bearing Block to dramatically increase anti-rotation efficiency. In addition, Delrin slide trench of anti-rotation bushing helps to prevent wear and tear for long time use (Product Code: MH-18FX011).

With the stylish look, best feature and design, CNC high performance part and more, the Aluminum/Carbon Fiber Main Frame will take your ordinary Blade 180 CFX helicopter to the next level of performance.

 

  Includes
1 x Aluminum/Carbon Fiber Main Frame

 

  Materials
Aluminum 7075
Aluminum 6061-T6
Carbon Fiber
Delrin

 

  Features
100% CNC machined from Aluminum 7075, Aluminum 6061-T6, Carbon Fiber and Delrin
Optimized for rigidity, stability, durability, and overall performance
Yields an accurate and crisp flight feeling for all flying styles
For better tail control authority and higher center gravity on the Blade 180 CFX helicopter
The larger space where the battery is mounted, to allow you to use longer and thicker battery sizes
Unique and stylish CNC Aluminum/Carbon Fiber materials

 

  Weight
32.38g

 

  Usage
Use for Blade 180 CFX

 

  Requires
Read and follow the Assembly Instruction carefully
Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution
Basic hand tools

 

  Instruction
Manual and Instruction included

 

Blade 180 CF X is a registered trademark of Horizon Hobby, LLC

Write a review

Note: HTML is not translated!
    Bad           Good
There are no notes for this product.