| |
Model+ |
Product Name |
Price |
Quantity |
Buy Now |
 |
MH-008SSE |
Anti-Rotation Support short version |
$11.99USD |
In
Stock |
 |
| Description:
This Anti-Rotation Support Short version has improved from the previous version, very light, strong and increased durability. It is designed to work only with our 90 degrees and 120 degree swashplates... |
 |
MH-021AL |
Light Metal Linkage Ball 3.85mm (5) |
$6.99USD |
In
Stock |
|
| Description:
These Precision Metal Balls 3.85mm are made from hard Aircraft Aluminum. It's designed very light and machined very tight tolerance +/-0.005mm to provide super smooth and precision controls. It's made to replace for all... |
 |
MH-024RS |
Tail Rudder Servo Mount |
$12.99USD |
In
Stock |
|
| Description:
The Tail Rudder Servo Mount is designed very light weight and strong to mount the Tail Rudder Servo securely onto the tail boom. It's also to allow to mechanically adjust servo position to achive maximum tail control... |
 |
MH-025 |
Precision Tail Gear Case |
$54.99USD $34.99USD |
In
Stock |
|
| Description:
This Tail Gear Case is designed very light weight and solid to allow entire Tail Rudder System to operate up 20,000 RPM without vibration. This new design is guaranteed to keep the Tail Shaft running true at all times.... |
 |
MH-026 |
Tail Pitch Lever (Bell Crank) |
$24.99USD |
In
Stock |
|
| Description:
The Tail Pitch
Lever is designed very light weight and strong. With double precision bearings
built in the unit provides best precision tail controls and smoothness.
Moreover, the Tail Pitch Lever uses... |
 |
MH-037HS36 |
Precision High Speed Steel 2x36mm Tail Shaft |
$6.50USD |
In
Stock |
|
| Description:
This Precision Tail Shaft is made from hardened high speed steel and precision grounded. It's made to improve the stability and performance for tail controls on Hornet... |
| |
MH-037HS40 |
Precision High Speed Steel 2x40mm Tail Shaft |
$6.50USD |
In
Stock |
|
| Description:
This Precision Tail Shaft is made from hardened high speed steel and precision grounded. It's made to improve the stability and performance for tail controls on Hornet... |
 |
MH-040 |
Precision Shaft Collar |
$5.99USD |
Out of
Stock |
|
| Description:
This Precision Shaft Collar is designed with 2.5mm lowest profile, lightest weight and maximum strength with dual set screws to hold tight onto main shaft.Weight: 0.10 grams
Usage: Hornet FP,... |
 |
MH-043 |
Precision Anti-Rotation Arm |
$14.99USD |
In
Stock |
|
| Description:
This Anti-Rotation Arm will improve the precision of the cyclic controls and performance for Fixed Pitch and Flybarless Hornet helicopters. It is only 3.00mm thin, very light weight... |
 |
MH-064A |
Vertical Fin |
$7.50USD |
Out of
Stock |
|
| Description:
The Vertical Fin is made from special chemistry very light weight and strong. It's designed to protect the Tail Rotor during hard landing. This Vertical Fin will be mounted direct to our Tail Gear Case H1 and H2 by using... |
 |
MH-064B |
Horizontal Fin |
$4.50USD |
Out of
Stock |
|
| Description:
This Horizontal Fin is made from special chemical very light weight and strong.Note: Horizontal Fin Holder is required to mount this item on Hornet Tail Boom securely.MH-064C:... |
 |
MH-064C |
Horizontal Fin Holder |
$0.00USD |
In
Stock |
|
| Description:
It's made to use on Hornet helicopters.Weight: N/A
Usage: Hornet FP, CP, Hornet II
Features:
Very Light, Strong and... |
 |
MH-193 |
Tail Pitch Slider |
$34.99USD |
In
Stock |
|
| Description: Compatible with the stock plastic bell crank!
The Tail Pitch Slider (TPS) is designed very light in weight, solid and strong. With dual bearing built in the unit gives the best precision tail controls and smoothness you... |
 |
MH-193SE |
Tail Pitch Slider SE |
$34.99USD |
In
Stock |
|
| Description: Not compatible with stock plastic bell crank!
The Tail Pitch Slider (TPS) SE is designed very light in weight, solid and strong. With dual bearing built in the unit gives the best precision tail controls and smoothness you... |
 |
MH-3012SR4 |
120CCPM Low Profile Swashplate SR4 |
$79.99USD $44.99USD |
In
Stock |
|
| Description:
This 120CCPM Low Profile Swashplate SR4 is designed to improve the precision of the cyclic controls, maximize cyclic performance for Hornet CP and H2 helicopters. It is very light... |
 |
MH-3132SE |
Precision Tail Rotor SE |
$59.99USD $34.99USD |
In
Stock |
|
| Description:
The NEW Precision Tail Rotor SE is improved base on the previous version using 4 micro precision miniature bearings and designed to improve tail controls performance on Hornet... |
Top » Home » MS - HORNET
MICROHELI - VORTEX 200 PRO
Instructions
