| |
Model+ |
Product Name |
Price |
Quantity |
Buy Now |
 |
MH-LX4102 |
Precision CNC Main Gear (LT version) w/ Auto-Rotation Hub-X400 |
$29.99USD |
In
Stock |
 |
| Description:
-The new LT version of Precision CNC Main Gear with Auto-Rotation Hub is designed to improve the performance over stock main gear at a more affordable price tag after a few months of developing the new type of high... |
 |
MH-TX4142TSE |
Precision Tail Set PRO SE - T-REX 450X/XL/SE |
$94.38USD |
In
Stock |
|
| Description:
-The Precision Tail Set PRO is an innovative design from MicroHeli in pursuit of zero slop and bind free operation solution for the T-REX. This is the results of months of research and testing from our designers to come up... |
 |
MH-XH4018SGP |
Front Shaft, Gear and Pulley Set - ARKX400 |
$29.99USD |
In
Stock |
|
| Description:
-The NEW front shaft, gear and pulley set is designed to achieve TRUE operation for the front gear drive assembly. With a bigger and stronger and high quality steel shaft, the new shaft can withstand larger force so it... |
 |
MH-XH4022PRO |
CNC Adjustable Tail Push Rod PRO - X400 |
$24.99USD |
In
Stock |
|
| Description:
-The
CNC tail push rod ends are designed to reduce slop and play of the Z-bend design
of the stock tail push rod ends. The new design ultilizes two miniature threaded
rods to enable connection to a new plastic ball... |
 |
MH-XH4022STD |
CNC Tail Push Rod Ends - X400 |
$14.99USD |
In
Stock |
|
| Description:
-The
CNC tail push rod ends are designed to reduce slop and play of the Z-bend design
of the stock tail push rod ends. The new design ultilizes two miniature threaded
rods to enable connection to a new plastic ball... |
 |
MH-XH4025 |
Precision Tail Pulley Case - X400 |
$44.99USD |
In
Stock |
|
| Description:
-The Precision Tail Pulley Case is designed very strong, solid and slylish for the ARK X-400 helicopters to allow entire Tail Rudder System to operate up to 20,000 RPM without vibration. This new... |
 |
MH-XH4025PS |
Precision Tail Pulley Case/Pulley Combo - X400 |
$54.99USD |
In
Stock |
|
| Description:
-The Precision Tail Pulley Case is designed very strong, solid and slylish for the ARK X-400 helicopters to allow entire Tail Rudder System to operate up to 20,000 RPM without vibration. This new... |
 |
MH-XH4026TPS |
Bell Crank/Tail Pitch Slider Combo - X400 |
$34.99USD |
In
Stock |
|
| Description:
-The combo of Tail Pitch Lever and Tail Pitch Slider SE will provide much improvement with tail control. With the new designed ball linkage system instead of pin system, the combo will reduce most the slop in the... |
 |
MH-XH4049ST |
Aluminum Tail Boom Support (Standard) - X400 |
$19.99USD |
In
Stock |
|
| Description:
-The aluminum tail support ends offer much more rigid than the stock plastic support ends. The support ends will be bolted securely on the heli and eleminates all the unecessary flexes. Together with high quality carbon... |
 |
MH-XH4064F2 |
Tail Fin V2 set - X400 |
$19.99USD |
In
Stock |
|
| Description:
The Tail Fin V2 set is machined from Carbon Fiber material, very light, strong and stylish. It is designed protect Tail Rotor during hard landing. And yet, the Tail Fin V2 set is also made with 1.50mm thickness Carbon Fiber... |
 |
MH-XH4064FR2 |
Tail Fin Round End V2 set - X400 |
$19.99USD |
In
Stock |
|
| Description:
The Tail Fin Round End V2 set is machined from Carbon Fiber material, very light, strong and stylish. It is designed protect Tail Rotor and Tail Case during hard landing. And yet, the Tail Fin Round End V2 set is also made... |
 |
MH-XH4064HF2 |
Horizontal Fin V2 - X400 |
$9.99USD |
In
Stock |
|
| Description:
The Horizontal Fin V2 is machined from Carbon Fiber material, very light and strong. It is designed to give new look on your models. And yet, the Horizontal Fin V2 is also made with 1.50mm thickness Carbon Fiber sheet to... |
 |
MH-XH4064VF2 |
Vertical Fin V2 - X400 |
$9.99USD |
In
Stock |
|
| Description:
The Vertical Fin V2 is machined from Carbon Fiber material, very light and strong. It is designed protect Tail Rotor during hard landing. And yet, the Vertical Fin V2 is also made with 1.50mm thickness Carbon Fiber sheet to... |
 |
MH-XH4064VFR |
Vertical Fin Round End - X400 |
$11.99USD |
In
Stock |
|
| Description:
The Vertical Fin Round End is machined from Carbon Fiber material, very light and strong. It is designed protect Tail Rotor and Tail Case during hard landing. And yet, the Vertical Fin Round End is also made with 1.50mm... |
 |
MH-XH4066TN |
Precision Titanium Main Shaft - X400 |
$24.99USD |
Out of
Stock |
|
| Description:
-The Precision Main Shaft is made from execeptionally strong titanium alloy Grade 5 and precision grounded. It's made to improve the stability and performance for head controls on
|
 |
MH-XH4077ST |
Steel Spindle Shaft - X400 |
$6.99USD |
In
Stock |
|
| Description:
-Replace stock spindle shaft with this strong steel shaft. It is made of strong steel and precisely grounded to provide highest level of straightness.
Includes:
-Steel spindle shaft-Two nylon... |
 |
MH-XH4102 |
Precision CNC Main Gear w/ Auto-Rotation Hub - X400 |
$39.99USD |
In
Stock |
|
| Description:
-The Precision CNC Main Gear with Auto-Rotation Hub is designed to improve the performance over stock main gear. The main purpose of this upgrade is to provide true, round and un-wobbled main gear. The complete set... |
 |
MH-XH4102MG |
Precision CNC Main Gear - X400 |
$15.99USD |
In
Stock |
|
| Description:
-The Precision CNC Main Gear is designed to improve the performance over stock main gear. The main purpose of this upgrade is to provide true, round and un-wobbled main gear. The new CNC main gear is produced with... |
Top » Home » ARK - X400
MICROHELI - VORTEX 200 PRO
Instructions
