| |
Model+ |
Product Name |
Price |
Quantity |
Buy Now |
 |
Invoice-3271 |
Invoice #3271 |
$2,110.60USD |
In
Stock |
 |
| |
 |
MH-008SSE |
Anti-Rotation Support short version |
$11.99USD |
In
Stock |
|
| Description:
This Anti-Rotation Support Short version has improved from the previous version, very light, strong and increased durability. It is designed to work only with our 90 degrees and 120 degree swashplates... |
 |
MH-021AL |
Light Metal Linkage Ball 3.85mm (5) |
$6.99USD |
In
Stock |
|
| Description:
These Precision Metal Balls 3.85mm are made from hard Aircraft Aluminum. It's designed very light and machined very tight tolerance +/-0.005mm to provide super smooth and precision controls. It's made to replace for all... |
 |
MH-024RS |
Tail Rudder Servo Mount |
$12.99USD |
In
Stock |
|
| Description:
The Tail Rudder Servo Mount is designed very light weight and strong to mount the Tail Rudder Servo securely onto the tail boom. It's also to allow to mechanically adjust servo position to achive maximum tail control... |
 |
MH-024RSH2 |
Tail Rudder Servo Mount Hornet II |
$12.99USD |
In
Stock |
|
| Description:
The Tail Rudder Servo Mount H2 is designed very light weight and strong to mount the Tail Rudder Servo securely onto the tail boom. It's also to allow to mechanically adjust servo position to achive maximum tail control... |
 |
MH-025 |
Precision Tail Gear Case |
$54.99USD $34.99USD |
In
Stock |
|
| Description:
This Tail Gear Case is designed very light weight and solid to allow entire Tail Rudder System to operate up 20,000 RPM without vibration. This new design is guaranteed to keep the Tail Shaft running true at all times.... |
 |
MH-025H2 |
Precision Tail Gear Case Hornet II |
$44.99USD $34.99USD |
In
Stock |
|
| Description:
This Tail Gear Case H2 is designed very light weight and solid to allow entire Tail Rudder System to operate up 20,000 RPM without vibration. This new design is guaranteed to keep the Tail Shaft running true at all times.... |
 |
MH-025HH2 |
Precision Tail Gear Case Hub Hornet II |
$19.99USD |
In
Stock |
|
| Description:
This Tail Gear Case HUB H2 is designed to convert from TGC H1 to TGC H2 without purchase complete a new TGC H2 kit for Hornet II helicopter. This Hub very light weight and solid to... |
 |
MH-026 |
Tail Pitch Lever (Bell Crank) |
$24.99USD |
In
Stock |
|
| Description:
The Tail Pitch
Lever is designed very light weight and strong. With double precision bearings
built in the unit provides best precision tail controls and smoothness.
Moreover, the Tail Pitch Lever uses... |
 |
MH-037HS36 |
Precision High Speed Steel 2x36mm Tail Shaft |
$6.50USD |
In
Stock |
|
| Description:
This Precision Tail Shaft is made from hardened high speed steel and precision grounded. It's made to improve the stability and performance for tail controls on Hornet... |
| |
MH-037HS40 |
Precision High Speed Steel 2x40mm Tail Shaft |
$6.50USD |
In
Stock |
|
| Description:
This Precision Tail Shaft is made from hardened high speed steel and precision grounded. It's made to improve the stability and performance for tail controls on Hornet... |
 |
MH-040 |
Precision Shaft Collar |
$5.99USD |
Out of
Stock |
|
| Description:
This Precision Shaft Collar is designed with 2.5mm lowest profile, lightest weight and maximum strength with dual set screws to hold tight onto main shaft.Weight: 0.10 grams
Usage: Hornet FP,... |
 |
MH-043 |
Precision Anti-Rotation Arm |
$14.99USD |
In
Stock |
|
| Description:
This Anti-Rotation Arm will improve the precision of the cyclic controls and performance for Fixed Pitch and Flybarless Hornet helicopters. It is only 3.00mm thin, very light weight... |
 |
MH-064A |
Vertical Fin |
$7.50USD |
Out of
Stock |
|
| Description:
The Vertical Fin is made from special chemistry very light weight and strong. It's designed to protect the Tail Rotor during hard landing. This Vertical Fin will be mounted direct to our Tail Gear Case H1 and H2 by using... |
 |
MH-064B |
Horizontal Fin |
$4.50USD |
Out of
Stock |
|
| Description:
This Horizontal Fin is made from special chemical very light weight and strong.Note: Horizontal Fin Holder is required to mount this item on Hornet Tail Boom securely.MH-064C:... |
 |
MH-064C |
Horizontal Fin Holder |
$0.00USD |
In
Stock |
|
| Description:
It's made to use on Hornet helicopters.Weight: N/A
Usage: Hornet FP, CP, Hornet II
Features:
Very Light, Strong and... |
| |
MH-064CH2 |
Horizontal Fin Holder Hornet II with Fin |
$14.99USD |
In
Stock |
|
| Description:
The Horizontal Fin holder secures the tail fin perfectly on the tail boon at the same time functions as the Snap-On holder for tail support rods. This unique design requires no CA glue and takes seconds to fit on... |
 |
MH-193 |
Tail Pitch Slider |
$34.99USD |
In
Stock |
|
| Description: Compatible with the stock plastic bell crank!
The Tail Pitch Slider (TPS) is designed very light in weight, solid and strong. With dual bearing built in the unit gives the best precision tail controls and smoothness you... |
 |
MH-3012SR4 |
120CCPM Low Profile Swashplate SR4 |
$79.99USD $44.99USD |
In
Stock |
|
| Description:
This 120CCPM Low Profile Swashplate SR4 is designed to improve the precision of the cyclic controls, maximize cyclic performance for Hornet CP and H2 helicopters. It is very light... |
 |
MH-3132SE |
Precision Tail Rotor SE |
$59.99USD $34.99USD |
In
Stock |
|
| Description:
The NEW Precision Tail Rotor SE is improved base on the previous version using 4 micro precision miniature bearings and designed to improve tail controls performance on Hornet... |
 |
MH-4002MBG |
Precision QNC Main Blade Grips - SHOGUN/SHOGUN V2 |
$29.99USD |
Out of
Stock |
|
| Available now in SILVER and BLUE color now. THURST BEARINGS! |
 |
MH-4012UK |
Upgrade kit UNI Swashplate - SHOGUN |
$9.99USD |
In
Stock |
|
| Description:
Replace 8 linkage balls on the T-REX UNI swashplate to these CNC lightweight metal balls and you can use the UNI swashplate on both T-REX and ZOOM/SHOGUN. If you already have a T-REX UNI swashplate... |
 |
MH-4012V2 |
.UNI Swashplate Version 2 - SHOGUN |
$34.99USD |
In
Stock |
|
|
Description:
The Swashplate V2 version is designed to use on PROTECH SHOGUN helicopter. It's made to improve cyclic controls, performance and stylish in flights. This... |
 |
MH-4017 |
CF Tail Drive Shaft Combo - SHOGUN |
$19.99USD |
In
Stock |
|
| Description:
-This design provides ultimate solution for the drive shaft system. It offers a newly designed and improved blue cnc input gear, while still inherited the super strong and durable characteristic of the famous... |
 |
MH-4018BR |
Brass CNC Tail Output Gear - SHOGUN |
$14.99USD |
Out of
Stock |
|
| Description:
CNC Tail Out Put Brass Gear includes a high speed stainless steel tail shaft (MH-4037HS45, a 6.99usd value). Direct replacement of the plastic tail output gear. A high speed... |
 |
MH-4018NB |
Blue CNC Tail Bevel Gears - SHOGUN |
$19.99USD |
In
Stock |
|
| Description:
These two CNC Tail Bevel Gears are made of special BLUE material, the same type of material that used for other MicroHeli Blue gears. The Bevel Gear set is just better with the BLUE material as well known by many expert... |
 |
MH-4018NYV2B |
Blue CNC Tail Output Gear Version 2 - SHOGUN |
$19.99USD |
In
Stock |
|
| Version 2 comes with a new aluminum shaft collar and set screws to help eliminate gear spinning on the tail shaft. A high speed stainless steel shaft MH-4037HS45 (6.99usd value) is also included!
Description:
The Tail... |
 |
MH-4018SBVB |
Blue CNC Speed Up Tail Bevel Gear - SHOGUN |
$24.99USD |
In
Stock |
|
| Description:
These latest released BLUE CNC bevel gears are designed to gain higher tail authority and better gyro holding power by increasing the gear ratio. The conical pinion gear teeth number has been... |
 |
MH-4018SS |
CNC pulley/Hardened SS Tail Shaft - SHOGUN/SHOGUN V2 |
$14.99USD |
In
Stock |
|
| Description:
-The CNC Aluminum Pulley is produced precisely by CNC machines to get correct gear mesh for super smoothness and lese friction on PROTECH SHOGUN tail system. It comes with the... |
 |
MH-4023 |
Aileron Lever - SHOGUN/SHOGUN V2 |
$19.99USD |
In
Stock |
|
| Description:
-The
aileron lever is designed to replace stock Z-bend design on the PROTECH SHOGUN/SHOGUN V2 helicopters. The new design
will remove all the slop and play from stock aileron... |
 |
MH-4024RS |
Tail Rudder Servo Mount - SHOGUN |
$14.99USD |
In
Stock |
|
| Description:
-The Tail Rudder Servo Mount is designed very light weight and strong to mount the Tail Rudder Servo securely onto the tail boom. It's also to allow to mechanically adjust servo position to achive maximum tail control... |
 |
MH-4025 |
Precision Tail Gear Case - SHOGUN |
$44.99USD |
Out of
Stock |
|
| Description:
This Tail Gear Case is designed very light weight and solid to allow entire Tail Rudder System to operate up 20,000 RPM without vibration. This new design is guaranteed to keep the Tail Shaft running true at all times. It... |
| |
MH-4025CF |
Precision Tail Gear Case for CF Boom - SHOGUN |
$44.99USD |
In
Stock |
|
| Description:
This Tail Gear Case is designed only for the upgrade carbon fiber tail boom of PROTECH SHOGUN helicopters. It is very light in weight and solid to allow entire Tail Rudder System to operate up 20,000 RPM without... |
 |
MH-4025HCF |
Precision Tail Gear Case HUB for CF Boom - SHOGUN |
$19.99USD |
In
Stock |
|
| Description:
This Tail Gear Case HUB is designed to convert from TGC for stock aluminum tail boom to TGC CF tail boom without purchase complete a new TGC ZOOM400 kit for PROTEHCH... |
 |
MH-4026 |
Tail Pitch Lever (Bell Crank) - SHOGUN |
$24.99USD |
In
Stock |
|
| Description:
The Tail Pitch Lever is designed very light weight and strong. With double precision bearings built in the unit gives best precision tail controls and smoothness you can get. Moreover, the Tail Pitch Lever uses Delrin... |
 |
MH-4037HS45 |
Precision High Speed Steel 2x45mm Tail Shaft - SHOGUN |
$6.50USD |
In
Stock |
|
| Description:
This Precision Tail Shaft is made from hardened high speed steel and precision grounded. It's made to improve the stability and performance for tail controls on PROTECH SHOGUN... |
 |
MH-4037TN45 |
Precision TITANIUM 2x45mm Tail Shaft - SHOGUN |
$8.99USD |
Out of
Stock |
|
| Description:
This Precision Tail Shaft is made from execeptionally strong titanium alloy Grade 5 and precision grounded. It's made to improve the stability and performance for tail controls on
|
 |
MH-4049ST |
Aluminum Tail Boom Support (Standard) - SHOGUN/SHOGUN V2 |
$19.99USD |
In
Stock |
|
| Description:
-The aluminum tail support ends offer much more rigid than the stock plastic support ends. The support ends will be bolted securely on the heli and eleminates all the unecessary flexes. Together with high quality carbon... |
 |
MH-4064C |
Horizontal Fin/Tail Boom Support Mount - SHOGUN |
$24.99USD |
In
Stock |
|
| |
 |
MH-4064F2 |
Tail Fin V2 set - SHOGUN |
$16.99USD |
In
Stock |
|
| Description:
The Tail Fin V2 set is machined from Carbon Fiber material, very light, strong and stylish. It is designed protect Tail Rotor during hard landing. And yet, the Tail Fin V2 set is also made with 1.50mm thickness Carbon Fiber... |
Top » Home » MicroHeli
MICROHELI - VORTEX 200 PRO
Instructions
