 | | Description:
-This is the hardened steel pinion 13T, module 0.5M, 3.17mm (1/8") motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared...
| | | | |
| | Description:
-This is the hardened steel pinion 12T, module 0.5M, 3.17mm (1/8") motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared...
| | | | |
| | Description:
-This is the hardened steel pinion 11T, module 0.5M, 3.17mm (1/8") motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared...
| | | | |
| | Description:
-This is the hardened steel pinion 24T, module 0.6M. 5mm motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared to brass...
| | | | |
| | Description:
-This is the hardened steel pinion 22T, module 0.6M, 5mm motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared to brass...
| | | | |
| | Description:
-This is the hardened steel pinion 20T, module 0.6M, 5mm motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared to brass...
| | | | |
| | Description:
-This is the hardened steel pinion 15T, module 0.6M, 5mm motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared to brass...
| | | | |
| | Description:
-This is the hardened steel pinion 14T, module 0.6M, 5mm motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared to brass...
| | | | |
| | Description:
-This is the hardened steel pinion 13T, module 0.6M, 5mm motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared to brass...
| | | | |
| | Description:
-This is the hardened steel pinion 12T, module 0.6M, 5mm motor shaft. The motor pinion is made of hardened steel to avoid pinion stripping during flight under high motor torque or crash. Steel pinions provide much stronger durability compared to brass...
| | | | |
| | Description:
-The Tail Rudder Servo Mount - T-REX 450X is designed very light weight and strong to mount the Tail Rudder Servo securely onto the tail boom. It's also to allow to mechanically adjust servo position to achive maximum tail control performance without exceeding servo travel...
| | | | |
| | Description:
-The Dual ArmTail Pitch Lever is redesigned an additional arm to provide additional support on both sides of the tail pitch slider. It is designed with an additional mounting hole to give users option to change pivot point for the bell carnk to achieve best...
| | | | |
| | Description:
-The NEW 120 degree CCPM Swashplate XL version is designed to use only on T-Rex 450XL/SE helicopters with the new XL frame that supports for CCPM swashplate configuration. It's stylish and super light weight aircraft-aluminum...
| | | | |
| | Description:
-The aluminum center hub is designed to replace stock plastic center hub. It is machined very accurately at +/-0.001mm to ensure the head does not wobble in flight. All precision o-rings are included.-Anodized in silver.
Includes:
-1x aluminum...
| | | | |
| | Description:
-The precision cnc main rotor head is designed with thrust bearings on the main blade grips to take away from the radial bearings. The main shaft bearings blocks with thrust bearings will reduce the chance of bearing seizing during hard 3D manuveurs at high head...
| | | | |
| | Description:
-The main blade grips are designed with thrust bearings to take away from the radial bearings. The main shaft bearings blocks with thrust bearings will reduce the chance of bearing seizing during hard 3D manuveurs at high head speed. This design is a safety feature...
| | | | |
Top » Home
ALIGN - T-REX 450X
Instructions
