Hardware set for MH Frame 350 QX Upgrades
 

Hardware set for MH Frame 350 QX Upgrades

$7.79 $12.99
Brand:
Product Code: MH-35QX007HW
Viewed

Product Description

The Hardware set for Microheli Frame 350 QX Upgrades is very strong & light.  This design keeps the Microheli Frame 350 QX very close to the Motor, to maintain stock flying characteristics.  With a good quality Hardware set, it will give you the confidence needed for worry free flying.

Each Hardware will be self tightening while the Motor is powered. Installation is quick & simple. No modifications necessary.

 

  Includes
30 x M2x4mm Cap Screw M2040CSS
20 x M2x6mm Cap Screw M2060CSS
4 x M2x8mm Cap Screw M2080CSS
16 x M3x10mm Cap Screw M30100CSS
2 x M3x25mm Cap Screw M30250CSS
4 x M2x10mm Set Screw M20100SSS
8 x M1.2x3mm Phillips Head Screw M1230PSS
10 x M1.6x3mm Phillips Head Screw M1630PSS
2 x M1.4x3mm Phillips Head Screw M1430PSS
2 x M1.4x5mm Phillips Head Screw M1450PSS

 

  Features
Very strong & light
Keeps the Microheli Frame 350 QX very close to the Motor, to maintain stock flying characteristics 
Will give you the confidence needed for worry free flying
Self tightening while the Motor is powered
Installation is quick & simple. No modifications necessary

 

 

  Weight
29.49g

 

  Usage
For Microheli Frame 350 QX Upgrades: MH-35QX005QK, MH-35QX105QK, MH-35QX205QK, MH-35QX305QK

 

  Requires
Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly

 

Write a review

Note: HTML is not translated!
    Bad           Good
There are no notes for this product.