Registration is free and easy!
The Airbrush Fiberglass Monster Scratch Fuselage design creates an unique and stylish overall appearance, which not only adds a super sharp look to your BLADE 230S / 230S V2 helicopter, but also significantly aids in high visibility from airbrush fiberglass shell.
The new design aims to gain sharp curve for a perfect aerodynamic cover, the most optimal flight performance with the low aerodynamic drag, as well as the simple and easy Airbrush Fiberglass Monster Scratch Fuselage set-up ever.
The Aluminum Canopy Mounts which are attached to this part, are only used for the Microheli Aluminum/Carbon Fiber Main Frame series: MH-230S005, MH-230S105, MH-230S205, but not for the stock frame).
The Aluminum Canopy Mount set - BLADE 230S / 230S V2 (Product Code: MH-230S005CM) is compatible with both the Microheli Aluminum/Carbon Fiber Main Frame series: MH-230S005, MH-230S105, MH-230S205 and the stock frame, and also allows you to use with the Airbrush Fiberglass Green Monster Fuselage.
|1 x Airbrush Fiberglass Canopy|
|1 x Airbrush Fiberglass Tail Boom Cover|
|2 x Aluminum Canopy Mount|
|2 x Aluminum Canopy Spacer|
|2 x Rubber Canopy Grommet|
|Creates a super sharp overall appearance, with high visibility|
|Unique and stylish airbrush fiberglass material|
|For the Microheli Aluminum/Carbon Fiber Main Frame series: MH-230S005, MH-230S105, MH-230S205, the stock frame and the stock tail motor mount|
|Not for the Microheli Aluminum/Carbon Fiber Light Weight Tail Motor Mount with Fin set series: MH-230S025G, MH-230S125G, MH-230S225G, MH-230S025F, MH-230S125F, MH-230S225F|
|Read and follow the Assembly Instruction carefully|
|Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution|
|Basic hand tools|
|Manual and Instruction included|