Customer Service: +1 (626) 888-HELI (4354)
+1 (626) 888-HELI (4354)
Powered by
Shopping Cart
My Account
CHECK OUT
Live Support
Categories
Upgrade Parts Finder
Forum
Shopping Cart
Your shopping cart is empty!
Currencies
New Products
Product Reviews
Precision CNC Hollow Aluminum Main Shaft/Collar set - BLADE MCPX
3.0/5 Stars
Average Rating
BRANDS

Read what others are saying about the products

Display:
Show:

Digital Ultra-Micro Precision Reversed Servo (Metal Gear) - BLADE 180 CFX by ax4hyr

Date Added: Tuesday 14 March, 2017
Digital Ultra-Micro Precision Reversed Servo (Metal Gear) - BLADE 180 CFX
I purchased these servos w/ the aluminum top case. The top case gear shaft pilot holes are to small and cause the servo gears to bind so don't waste 30 dollars + shipping. I have not had the chance to fly them yet so I don't know how good they are all round but I will review that as well. I thought perhaps this was a bad case but all three are the...

Rating: Digital Ultra-Micro Precision Reversed Servo (Metal Gear) - BLADE 180 CFX 2 of 5 Stars!

CNC AL/Plastic Triple Orange Blade Conversion set - BLADE 200 SRX/ 200 S by mike

Date Added: Tuesday 14 March, 2017
CNC AL/Plastic Triple Orange Blade Conversion set - BLADE 200 SRX/ 200 S
Very impressed with the quality and machine work ,every part is precisely and goes together perfectly. Installation takes only about 15 to 20 minutes. Flight performance is great ,with improved thrust and precise fluid movements in your cyclic stick ,the sound of the 3 blade sounds amazing as well. This will be great for a scale body too. Definite...

Rating: CNC AL/Plastic Triple Orange Blade Conversion set - BLADE 200 SRX/ 200 S 5 of 5 Stars!

CNC Aluminum/Carbon Fiber Quadcopter Frame Kit - BLADE 350 QX by Aaron

Date Added: Tuesday 14 March, 2017
CNC Aluminum/Carbon Fiber Quadcopter Frame Kit - BLADE 350 QX
Did a YouTube review. I've been wanting a carbon fiber frame for the Blade 350 QX for a long time and finally found one that exceeded my expectations. https://www.youtube.com/watch?v=Bp8lpGC9u7w...

Rating: CNC Aluminum/Carbon Fiber Quadcopter Frame Kit - BLADE 350 QX 5 of 5 Stars!

CNC AL/Carbon Fiber Racing Quadcopter Kit - BLADE 200 QX by Rick

Date Added: Monday 27 February, 2017
CNC AL/Carbon Fiber Racing Quadcopter Kit - BLADE 200 QX
Can you mount a fpv camera on the frame?...

Rating: CNC AL/Carbon Fiber Racing Quadcopter Kit - BLADE 200 QX  5 of 5 Stars!

Aluminum/Carbon Fiber Main Frame (RED) - BLADE 450X by Len McWilliams

Date Added: Monday 27 February, 2017
Aluminum/Carbon Fiber Main Frame (RED) - BLADE 450X
Overall, I like what you've done with the CF frame. However there is a significant weakness in the lower rear portion of the frame. There is very little structural strength in this part of the frame making it susceptible to damaging forces coming from the rear landing skid point of attachment. This is similar to the weakness exhibited by the Blade ...

Rating: Aluminum/Carbon Fiber Main Frame (RED) - BLADE 450X 3 of 5 Stars!

CNC Aluminum/Carbon Fiber Quadcopter Frame Kit - BLADE 350 QX by Brian Shultz

Date Added: Saturday 25 February, 2017
CNC Aluminum/Carbon Fiber Quadcopter Frame Kit - BLADE 350 QX
really nice kit looks awesome instructions a little vague not too bad..not really for filming more for extreme flying...

Rating: CNC Aluminum/Carbon Fiber Quadcopter Frame Kit - BLADE 350 QX 5 of 5 Stars!

Aluminum/Carbon Torque Tube Drive w/ Double Bearing - BLADE 180 CFX by Joey B

Date Added: Tuesday 24 November, 2015
Aluminum/Carbon Torque Tube Drive w/ Double Bearing - BLADE 180 CFX
The stock Torque Tube was the first piece to brake on my 180CFX. Unfortunately it was not the last! This replacement is absolutely perfect. I usually buy 2 of everything but this replacement looks rock solid!...

Rating: Aluminum/Carbon Torque Tube Drive w/ Double Bearing - BLADE 180 CFX 5 of 5 Stars!

Aluminum Landing Gear - BLADE 200 QX by Papa Tom

Date Added: Wednesday 26 November, 2014
Aluminum Landing Gear - BLADE 200 QX
Got a set and installed LEDs inside them and they look great. I ut the first set in PFG frame. I am going to order another set and put on my stock frame. ...

Rating: Aluminum Landing Gear - BLADE 200 QX 5 of 5 Stars!

Aluminum Canopy Mount - BLADE 130X/120 S by John Longyear

Date Added: Wednesday 02 October, 2013
Aluminum Canopy Mount - BLADE 130X/120 S
Very nice parts. The stock canopy grommets pop on and off the mounts pretty easily and they seem more durable than the plastic/CF stock mounts....

Rating: Aluminum Canopy Mount - BLADE 130X/120 S 5 of 5 Stars!

1.5x4x1.2 Radial Bearing by Robin Tegewaldt

Date Added: Wednesday 10 July, 2013
1.5x4x1.2 Radial Bearing
These bearings also fit the Double Bearing Weighted Tail Blade Grip combo (RED) - BLADE 130X.. Someone should link them from the blade 130x upgrades page.. because bearings for the tail blade gribs can be hard to find :) Regards Robin...

Rating: 1.5x4x1.2 Radial Bearing 5 of 5 Stars!

Airbrush Fiberglass Dark Assassin Canopy - MCPXBL by Enes Aksamija

Date Added: Tuesday 18 June, 2013
Airbrush Fiberglass Dark Assassin Canopy - MCPXBL
This is absolutely the best canopy for the mcpx bl so far. Perfect fit, not oversized like most other aftermarket canopies for the mcpx BL. Awesome looking and very durable. thumbs up for the microheli canopies!...

Rating: Airbrush Fiberglass Dark Assassin Canopy - MCPXBL 5 of 5 Stars!

Precision CNC Aluminum Swashplate (RED) - AXE100CP by Hollis Inman

Date Added: Thurday 30 May, 2013
Precision CNC Aluminum Swashplate (RED) - AXE100CP
This is my second review as promised,I purchase this product 5/19/13 and I received it 5/28/13 which is very fast shipping to the USA! I live in Machias,Maine USA 9 days is very delightful from where the product comes from! I will be making a YouTube video about this product very soon at charlie3273 channel very soon! :)...

Rating: Precision CNC Aluminum Swashplate (RED) - AXE100CP 5 of 5 Stars!

Precision CNC Aluminum Main Rotor Hub w/ Button (RED) - BLADE MCPX by Russell Piper

Date Added: Sunday 26 May, 2013
Precision CNC Aluminum Main Rotor Hub w/ Button (RED) - BLADE MCPX
Another wonderful upgrade to compliment the blade grips and swash plate. Extremely strong. Due to the linkage supports being closed on the ends, the rotor linkages don't fly off and get lost in the grass :) Highly recommended :)...

Rating: Precision CNC Aluminum Main Rotor Hub w/ Button (RED) - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Swashplate (RED) - BLADE MCPX by Russell Piper

Date Added: Sunday 26 May, 2013
Precision CNC Aluminum Swashplate (RED) - BLADE MCPX
Super product and great quality. I broke 4 original plastic swash plates in a month from heavy crashes before upgrading to aluminum. I've since driven my MCPX into the ground repeatedly trying a few daring 3D maneuvers and have yet to scratch it. Strongly recommend this upgrade....

Rating: Precision CNC Aluminum Swashplate (RED) - BLADE MCPX 5 of 5 Stars!

Advanced X Frame - BLADE MCPX by Russell Piper

Date Added: Sunday 26 May, 2013
Advanced X Frame - BLADE MCPX
Outstanding product and well worth paying for. Interchangeable canopy pins are a great advantage. Easy to install. Only thing I would recommend is replacing the delrin tail boom mount with the aluminum upgrade as the thread can strip. Apart from that, the quality is outstanding :)...

Rating: Advanced X Frame - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Swashplate (RED) - AXE100CP by Hollis Inman

Date Added: Wednesday 22 May, 2013
Precision CNC Aluminum Swashplate (RED) - AXE100CP
I would like to make two reviews this one is written before ever getting this part! The helimax cp100 is great however in the hand of a newbie like me the plastic swash plate that comes with it gets the collar balls broken off very easy! Thanks to Micro heli for making this replacement part! Helimax's upgrade version of the swash plate still comes ...

Rating: Precision CNC Aluminum Swashplate (RED) - AXE100CP 5 of 5 Stars!

CNC Aluminum Ultimate MSR Upgrade combo - BLADE MSR by Christopher Briney

Date Added: Wednesday 27 March, 2013
CNC Aluminum Ultimate MSR Upgrade combo - BLADE MSR
I bought this kit 2 days ago, I like the kit overall but there a few things you should know about. Your tail boom and motor are not taken apart easily, I had to cut the wires (i cut a the tail roter side) and had to soder them back, so be aware if you don't like messing with the wiring, your tail boom replacement will be unusable. Also while on the...

Rating: CNC Aluminum Ultimate MSR Upgrade combo - BLADE MSR 4 of 5 Stars!

Advanced X Frame - MCPXBL by Chris Goebel

Date Added: Wednesday 06 March, 2013
Advanced X Frame - MCPXBL
The x frame is awsome for this mcpx bl i just purchased 2 and installed them and it was easy to do looks awsome great product keep up the good work microheli i waiting on the blade grips to come out and center hub and some blades so i would buy this frame it awsome thxs...

Rating: Advanced X Frame - MCPXBL 5 of 5 Stars!

Plastic Main Blade 105mm (WHITE) - BLADE MCPX by Brian Barnes

Date Added: Sunday 27 January, 2013
Plastic Main Blade 105mm (WHITE) - BLADE MCPX
These are the best blades that I have used on an mcpx (brushless). I have also used them on mIni cp and V100D03, and found them to be the best blades for those helis as well. The 130x equivalent blades are just as good, and I am using those on V120D05, and they have improved the performance of that heli. Two thumbs up for microheli blades. I ho...

Rating: Plastic Main Blade 105mm (WHITE) - BLADE MCPX 5 of 5 Stars!

Aluminum/Carbon Fiber/Delrin Frame w/ 3rd Bearing - BLADE MCPX by Ken Mardus

Date Added: Sunday 27 January, 2013
Aluminum/Carbon Fiber/Delrin Frame w/ 3rd Bearing - BLADE MCPX
Well designed with serious upgrades at key points, most notably the boom mount. The mount can be purchased as a CNC machined block instead of the delron. This allows torquing of the set screw without stripping and provides a tighter fit and matched up with the MicroHeli frame is a nice combo. Flight characteristics are enhanced due to better balanc...

Rating: Aluminum/Carbon Fiber/Delrin Frame w/ 3rd Bearing - BLADE MCPX 5 of 5 Stars!

Plastic Main Blade 85mm (GREEN) - BLADE NANO CPX by Eric Marrison

Date Added: Friday 04 January, 2013
Plastic Main Blade 85mm (GREEN) - BLADE NANO CPX
Even more durable than the stock nano blades, and these are much more visible. I am ordering more now....

Rating: Plastic Main Blade 85mm (GREEN) - BLADE NANO CPX 5 of 5 Stars!

Delrin Main Gear w/ Hub set - BLADE 130X by Koen Verschuren

Date Added: Monday 31 December, 2012
Delrin Main Gear w/ Hub set - BLADE 130X
this upgrade gives you the possibillity to adjust the slop between A an B gear resulting in an extreme ligt running drive system witout slop GREAT JOB !...

Rating: Delrin Main Gear w/ Hub set - BLADE 130X 5 of 5 Stars!

Titanium X Swashplate w/ Anti-Rotation Guide combo (R) - BLADE 130X by Koen Verschuren

Date Added: Monday 31 December, 2012
Titanium X Swashplate w/ Anti-Rotation Guide combo (R) - BLADE 130X
Beautifully crafted, perfect fit no need for o-rings etc great control...

Rating: Titanium X Swashplate w/ Anti-Rotation Guide combo (R) - BLADE 130X 5 of 5 Stars!

Aluminum Swashplate w/ Anti-Rotation Guide (RED) - BLADE NANO CPX/S by Gary Owen

Date Added: Tuesday 27 November, 2012
Aluminum Swashplate w/ Anti-Rotation Guide (RED) - BLADE NANO CPX/S
I bought this one because it was only $2 more. The quality of the swash seems very nice. The only problem is the servo link rubbing the AR guide. From my understanding MicroHeli is working on a fix....

Rating: Aluminum Swashplate w/ Anti-Rotation Guide (RED) - BLADE NANO CPX/S 4 of 5 Stars!

Aluminum/Carbon Fiber/Derlin Flybar system - BLADE 120 SR by John Hurlburt

Date Added: Monday 11 June, 2012
Aluminum/Carbon Fiber/Derlin Flybar system - BLADE 120 SR
I bought this as a last resort to cure severe TBE on my 120sr. It worked! The heli is very stable now and much easier to fly....

Rating: Aluminum/Carbon Fiber/Derlin Flybar system - BLADE 120 SR 5 of 5 Stars!

Carbon Fiber Main Blades - BLADE MCPX by Kjetil Uthne Hansen

Date Added: Thurday 12 April, 2012
Carbon Fiber Main Blades - BLADE MCPX
Being a relative novice I guess I don't have the quite the "feel" of a more accomplished pilot. I have however installed alu- swashplate, head and grips. I also installed the carbon skids w/ support, and the heli was immediately "firmer" and more responsive. With the installation of the Carbon Main blades I took the step and flipped the MCPX for t...

Rating: Carbon Fiber Main Blades - BLADE MCPX 5 of 5 Stars!

Aluminum/Carbon Fiber/Derlin Flybar system - BLADE 120 SR by Ken Mardus

Date Added: Sunday 01 April, 2012
Aluminum/Carbon Fiber/Derlin Flybar system - BLADE 120 SR
I purchased the little brother for my MSR its pricey but well worth it. I've been through three differ. flybars and this one is by far the best going. The secret is in the design with its weighted paddles providing the stability. Some "break in" might be needed as new can be a bit stiff....

Rating: Aluminum/Carbon Fiber/Derlin Flybar system - BLADE 120 SR 5 of 5 Stars!

Precision CNC Aluminum Main Blade Grip V2 - BLADE MSR by Mike Fields

Date Added: Wednesday 07 March, 2012
Precision CNC Aluminum Main Blade Grip V2 - BLADE MSR
Im having a ton of fun with the stock MSRX and for weighing around an ounce its very stable even in wind. However, I dislike the stock plastic blade grips that break every 10 flights or when I happen to have a minor crash in the grass. I am very pleased with the look and fit of these blade grips. The durability is great and they definitely help pro...

Rating: Precision CNC Aluminum Main Blade Grip V2 - BLADE MSR 5 of 5 Stars!

Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX by Robert Lancaster

Date Added: Wednesday 01 February, 2012
Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX
Houston, We've Got a Problem. Love the design but the links don’t fit through the rotation arms. The problem is the Blade links vary in size just enough not to fit. I have several sets of links and I’m going to have to hand sand each one to fit. It’s a case of precision aluminum vs. plastic molding. MicroHeli needs to build a little tolerance...

Rating: Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX 4 of 5 Stars!

Aluminum/Carbon Fiber/Delrin Frame w/ 3rd Bearing - BLADE MCPX by Andros Colon

Date Added: Wednesday 09 November, 2011
Aluminum/Carbon Fiber/Delrin Frame w/ 3rd Bearing - BLADE MCPX
The quality and design on this frame is top notch! It looks like special care and attention were given to the weak points of the original plastic design and the results were amazing. The craftsmanship and quality of the carbon fiber is very good and the machining looks amazing. The Mcpx logo at the bottom of the frame is a plus. The dual coreless t...

Rating: Aluminum/Carbon Fiber/Delrin Frame w/ 3rd Bearing - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Main Shaft - BLADE 120 SR by Andros Colon

Date Added: Sunday 02 October, 2011
Precision CNC Aluminum Main Shaft - BLADE 120 SR
Stable,Stable,Stable!!! And you get two!!! I bent the first one after a month but lucky enough, it comes with 2!!!...

Rating: Precision CNC Aluminum Main Shaft - BLADE 120 SR 5 of 5 Stars!

Precision CNC Aluminum Swashplate - BLADE 120 SR by Andros Colon

Date Added: Sunday 02 October, 2011
Precision CNC Aluminum Swashplate - BLADE 120 SR
With the 120sr is sometimes hard to fly outdoors if the wind is too strong. Since I bought this swashplate, it has allowed me to fly outdoors wit no problem due to the extended swashplate balls. It gives you more angle on the swash, better cyclic response and allows you to fly outdoors with stronger winds. This is a must have for any 120sr owner fo...

Rating: Precision CNC Aluminum Swashplate - BLADE 120 SR 5 of 5 Stars!

Aluminum Tail Rotor Housing/Carbon Vertical Fin - BLADE 120 SR by Andros Colon

Date Added: Sunday 02 October, 2011
Aluminum Tail Rotor Housing/Carbon Vertical Fin - BLADE 120 SR
My 120sr tail motor use to run hot while flying outdoors and after a couple of minutes, the tail motor was so hot that it was having a hard time holding the tail. The aluminum motor mount dissipates the heat and the tail holds during the whole flight....

Rating: Aluminum Tail Rotor Housing/Carbon Vertical Fin - BLADE 120 SR 5 of 5 Stars!

Precision CNC Aluminum Main Blade Grip - BLADE 120 SR by Andros Colon

Date Added: Sunday 02 October, 2011
Precision CNC Aluminum Main Blade Grip - BLADE 120 SR
A must have if you want your 120sr to be super stable. It looks nice too!!! I have had it over 8 months and crashed a lot of times without a single problem....

Rating: Precision CNC Aluminum Main Blade Grip - BLADE 120 SR 5 of 5 Stars!

Tail Motor Mount w/ Vertical Fin set - BLADE MCPX by Andros Colon

Date Added: Sunday 02 October, 2011
Tail Motor Mount w/ Vertical Fin set - BLADE MCPX
The carbon fiber fin really helps to keep the tail locked in while flying in windy conditions. When I was flying with the stock tail fin, the wind would push the tail by the fin and I would loose orientation while learning. I recently upgraded to brushless main motor and dual coreless tail motor mod and was forced to remove the aluminum tail. I,m w...

Rating: Tail Motor Mount w/ Vertical Fin set - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Swashplate - BLADE MCPX by Andros Colon

Date Added: Sunday 02 October, 2011
Precision CNC Aluminum Swashplate - BLADE MCPX
This thing is a work of art!!! The quality and the design are flawless, the performance is extraordinary and noticeable the moment you put it on. The grommet mod is not required with this swashplate as it removes about 90% of the slop that the stock swashplate had. Trouble free since I bought it over 5 months ago....

Rating: Precision CNC Aluminum Swashplate - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Main Blade Grip set - BLADE MCPX by Andros Colon

Date Added: Sunday 02 October, 2011
Precision CNC Aluminum Main Blade Grip set - BLADE MCPX
This is so far the best aluminum upgrade I have done to my MCPX. It really adds a nice and crisp cyclic response with the wider washers and have never had an issue with them after many, many, many crashes. These grips can really take a beating and still fly like new!!! I also notice that the head is nice and tight and the wobble on the feathering s...

Rating: Precision CNC Aluminum Main Blade Grip set - BLADE MCPX 5 of 5 Stars!

Precision CNC Hollow Aluminum Main Shaft/Collar set - BLADE MCPX by Andros Colon

Date Added: Sunday 02 October, 2011
Precision CNC Hollow Aluminum Main Shaft/Collar set - BLADE MCPX
I recommend this main shaft to advance users who barely crash their MCPX. The added rotational mass really helps to keep the heli very stable during hover. You might have to add just a tiny bit of either pitch or head speed on your transmitter due to the added rotational mass but it is worth it since the flight characteristics are improved. I rated...

Rating: Precision CNC Hollow Aluminum Main Shaft/Collar set - BLADE MCPX 3 of 5 Stars!

Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX by Andros Colon

Date Added: Sunday 02 October, 2011
Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX
This head is extremely detailed. I have been using the same head plastic links for over 3 months. It works even better with the aluminum blade grips because the plastic links do not pop off as often and if they do, you won't loose them due to the design of the head being a closed loop. When you combine the head and the blade grips you will notice t...

Rating: Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX 4 of 5 Stars!

Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX by David Field

Date Added: Sunday 25 September, 2011
Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX
Great quality and much stronger than it looks. Only downside is that the carbon boom supports sometimes pop out of the ends. I'm afraid to CA glue them in incase I need to replace a broken rod....

Rating: Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX 5 of 5 Stars!

Aluminum/Carbon Fiber/Delrin Frame - BLADE MCPX by David Field

Date Added: Sunday 25 September, 2011
Aluminum/Carbon Fiber/Delrin Frame - BLADE MCPX
Excellent quality as usual. I like that the landing gear is now clamped to the chassis so it doesn't separate so easily in a less than perfect landing. This frame arrived with both 2mm and 3mm boom adapters so I now have a choice. I'm currently using 2mm solid carbon fiber for my tail boom and its very steady (I do have the MH tail boom support ...

Rating: Aluminum/Carbon Fiber/Delrin Frame - BLADE MCPX 5 of 5 Stars!

CNC Aluminum Ultimate MSR Upgrade combo - BLADE MSR by Bryon Trott

Date Added: Monday 12 September, 2011
CNC Aluminum Ultimate MSR Upgrade combo - BLADE MSR
Waiting to test fly! The kit was fun to assemble. Have only a bit more to do and should be to get fly soon. Agree with others that the tail boom is loose. Looks like it might work better int the newer Aluminum and carbon fiber frame?...

Rating: CNC Aluminum Ultimate MSR Upgrade combo - BLADE MSR 4 of 5 Stars!

Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX by James Cook

Date Added: Tuesday 09 August, 2011
Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX
I was pleasantly surprised when the landing gear came mostly assembled. The quality of the parts is just as I have come to expect from MicroHeli, top quality. Although the pieces are tiny I assembled the necessary components without a magnifying aid. The threads are cut into metal parts with great precision and the screws held without fail. I am pl...

Rating: Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX 5 of 5 Stars!

Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX by Randy George

Date Added: Saturday 06 August, 2011
Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX
This looks great, secures the battery far better than stock. Stock gear kept popping off all the time, these so far have stayed on after installation. One problem though I had a hard crash while inverted, cracked the tail, the tail supports broke and micro heli does not seem to have replacements listed for sale so I will not obviously re-purchase t...

Rating: Aluminum/Carbon Fiber Landing Gear w/ Support - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX by Henri Karrour

Date Added: Wednesday 03 August, 2011
Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX
Feels much more 'locked in' Adding another good thing is that the links from the blade grips to the swash plate are less likely to be lost because they slide in an enclosed passage. Beside being functionally better, it looks better as well than the plastic.. (But again I am not a plastic fan!) In short buy it you won't regret it....

Rating: Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX 5 of 5 Stars!

Aluminum XL Tail Boom set - BLADE MCPX by David Field

Date Added: Monday 01 August, 2011
Aluminum XL Tail Boom set - BLADE MCPX
This is the only MH product I've had problems with. The M1 x 2 screw supplied to clamp the tail motor is too short. I tried heating the clamp and even forcing it but this screw was just too short. If I ever got the screw to bite it would pop out as I started to tighten it. I then tried to get around this by using one of the M1 x 3 screws whic...

Rating: Aluminum XL Tail Boom set - BLADE MCPX 4 of 5 Stars!

Precision CNC Aluminum Swashplate - BLADE MCPX by David Field

Date Added: Sunday 31 July, 2011
Precision CNC Aluminum Swashplate - BLADE MCPX
Much nicer looking than the original item and removes nearly all of the slop. I don't know why but I haven't had this one jump out of the swash guide like the original used to? It seems every MH upgrade I add to my heli's reduces vibration and increases stability and performance. When am I going to see a CNC/carbon fibre frame?...

Rating: Precision CNC Aluminum Swashplate - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Main Blade Grip set - BLADE MCPX by David Field

Date Added: Sunday 31 July, 2011
Precision CNC Aluminum Main Blade Grip set - BLADE MCPX
Once again, excellent design and quality. Normally I don't upgrade things until I break the original but I bought these to replace my original plastic blade grips as I didn't get the free safety upgrade so I thought this was a better option than buying the plasic 'B' marked items. Another positive flight stability item...

Rating: Precision CNC Aluminum Main Blade Grip set - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX by David Field

Date Added: Sunday 31 July, 2011
Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX
Like all Microheli parts this rotor hub is extremely well designed and made. I believe it makes a positive difference to the stability and handling of the heli. I think the closed end design of the swash link guides means you will be less likely to lose those little links Not sure I'll ever be good enough to use the button. I've only had m...

Rating: Precision CNC Aluminum Main Rotor Hub w/ Button - BLADE MCPX 5 of 5 Stars!

Precision CNC Aluminum Swashplate - BLADE MCPX by Christopher Rolfes

Date Added: Sunday 10 July, 2011
Precision CNC Aluminum Swashplate - BLADE MCPX
High quality piece. I have used for a week or so now and love this upgrade. This swash is tight so it eliminates the unwanted play in the head....

Rating: Precision CNC Aluminum Swashplate - BLADE MCPX 5 of 5 Stars!