Grid View:
 
Pre-Order

CNC Aluminum Carbon Front Bumper (RED) - AXIAL SCX24

NS-SC24122
(0)
$29.99

The CNC Aluminum Carbon Front Bumper is machined with precise CNC tolerances from Aluminum and Carbon fiber to gain maximum precision, rigidity and long-term durability. It is directly replaced the stock plastic components.Included:1 x CNC Aluminum Carbon Front BumperUsage:Use for AXIAL SCX24Requires:Read and follow the Assembly Inst..

 

CNC Triple Carbon Plastic Blades Conversion set (RED) - OMP Hobby M2 V1/V2/EXP

MH-M2EX101TBK
(0)
$104.99

Featuring Microheli’s best designs, the CNC Triple Carbon Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 V1 / V2 / EXP helicopter.Every detail of this Conversion set was scrutinized in terms of lift for..

 
Pre-Order

CNC Quad Carbon Plastic Blades Conversion set (GOLD) - OMP Hobby M2 V1/V2/EXP

MH-M2EX201QBK
(0)
$134.99

Featuring Microheli’s best designs, the CNC Quad Carbon Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 V1 / V2 / EXP helicopter.Every detail of this Conversion set was scrutinized in terms of lift ..

 

CNC Triple Yellow Carbon Plastic Blades Conversion set - OMP Hobby M2 V1/V2/EXP

MH-M2EX001TYL
(0)
$106.99

Featuring Microheli’s best designs, the CNC Triple Yellow Carbon Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 V1 / V2 / EXP helicopter.Every detail of this Conversion set was scrutinized in terms ..

 

CNC Triple Orange Carbon Plastic Blades Conversion set - OMP Hobby M2 V1/V2/EXP

MH-M2EX001TOR
(0)
$106.99

Featuring Microheli’s best designs, the CNC Triple Orange Carbon Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 V1 / V2 / EXP helicopter.Every detail of this Conversion set was scrutinized in terms ..

 

CNC Triple Green Carbon Plastic Blades Conversion set - OMP Hobby M2 V1/V2/EXP

MH-M2EX001TGR
(0)
$106.99

Featuring Microheli’s best designs, the CNC Triple Green Carbon Plastic Blades Conversion set is designed with material strength and precise CNC tolerances in mind, to optimize stability, durability, response and overall performance of the OMP Hobby M2 V1 / V2 / EXP helicopter.Every detail of this Conversion set was scrutinized in terms of li..

 

Brass Wheel Hub Set - AXIAL SCX24

NS-SC24007EH
(0)
$12.99

The Brass Wheel Hub add more weight for each wheel. They help lower the center of gravity for your car, increase climbing and crawling.Included:4 x Brass Wheel Hub4 x Steel PinUsage:Use for stock AXIAL SCX24..

 

CNC Aluminum Steering Servo Mount (BLUE) - AXIAL SCX24

NS-SC24303
(0)
$15.99

The CNC Aluminum Steering Servo Mount is machined with precise CNC tolerances from Aluminum to gain maximum precision, rigidity and long-term durability. It is directly replaced the stock plastic components. More than that, this Steering Servo Mount can fit the EMAX ES08MA servo.Included:1 x CNC Aluminum Steering Servo MountUsage:Use for ..

 

Brass Extended 6mm Wheel Hub Set - AXIAL SCX24

NS-SC24007
(0)
$24.99

The Brass Extended Wheel Hub add 6mm wider for each wheel. They are also add 5.45gr each to help increase stability, no flipping, improve climbing and crawling.Included:4 x Brass Extended 6mm Wheel Hub4 x Brass Nut4 x Steel PinUsage:Use for stock AXIAL SCX24..

 

Carbon Fiber Chassis Frame Rail Set - AXIAL SCX24

NS-SC24015
(0)
$19.99

The Carbon Fiber Chassis Frame Rail is made from pure 3K carbon fiber. They can fit all AXIAL SCX24 versions. Only 7.5gr weight but rigidity, stability and durabilityIncluded:2 x Carbon Fiber Chassis Frame RailUsage:Use for AXIAL SCX24 all versions..

 

14.5gr Each Brass Wheel Weight Set - AXIAL SCX24

NS-SC24002BW
(0)
$9.99

The Brass Wheel Weight add 14.5gr for each wheel. They help lower the center of gravity for your car, no flipping backwards, increase climbing and crawling.Should be used for all 4 wheels or only 2 in the front.Included:2 x Brass Wheel WeightUsage:Use for stock AXIAL SCX24..

 
Pre-Order

CNC Aluminum Diff Cover (BLACK) - AXIAL SCX24

NS-SC24405
(0)
$13.99

The CNC Aluminum Diff Cover is machined with precise CNC tolerances from Aluminum to gain maximum precision, rigidity and long-term durability. It is directly replaced the stock plastic components.Included:1 x CNC Aluminum Diff CoverUsage:Use for AXIAL SCX24Requires:Read and follow the Assembly Instruction carefullyLoctite (#242 is r..

 
 

Precision CNC Aluminum Swashplate - OMP Hobby M2 V1/V2/EXP

MH-M2EX012
(0)
$29.99

The Precision CNC Aluminum Swashplate is specifically designed for improvements in stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter. It is directly replaced the stock Swashplate.The new upgrade product is machined with precise CNC tolerances from Aluminum to gain the best precision together with S..

 

Aluminum Main Blade Grip w/ Thrust Bearing (RED) - OMP Hobby M2 V1/V2/EXP

MH-M2EX102
(0)
$24.99

The CNC Aluminum Main Blade Grip w/ Thrust Bearing is specifically designed for improvements in rigidity, stability, durability and overall performance on the OMP Hobby M2 V1 / V2 / EXP helicopter.The Main Blade Grip design utilizes the best CNC machining to produce tight and accurate tolerances throughout the part from Aluminum and Stain..

 
 
Pre-Order

Carbon Fiber/Delrin Anti-Rotation Guide set (GOLD) - OMP Hobby M1

MH-OMM1211
(0)
$10.99

Included: 1 x Carbon Fiber/Delrin Anti-Rotation Guide set   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical screws for safety precaution Basic hand tools ..

 
Sold out

Airbrush Fiberglass Bell UH-1 Huey 174th Shark Scale /W Landing Gear - BLADE 230S / V2 / Smart

MH-23V2-SBU6
(0)
$109.99

Airbrush Fiberglass Bell UH-1 Huey Scale design creates a super sharp overall appearance, which not only adds a cool new look to your BLADE 230S / V2 / Smart helicopter, but also significantly aids in high visibility from airbrush fiberglass shell.   Included: 1 x Airbrush Fiberglass Bell UH-1 Huey Scale 1 ..

 
Sold out

Airbrush Fiberglass Bell UH-1 Huey 174th Shark Scale - BLADE 230S / V2 / Smart

MH-23V2-SBU5
(0)
$99.99

Airbrush Fiberglass Bell UH-1 Huey Scale design creates a super sharp overall appearance, which not only adds a cool new look to your BLADE 230S / V2 / Smart helicopter, but also significantly aids in high visibility from airbrush fiberglass shell.   Included: 1 x Airbrush Fiberglass Bell UH-1 Huey Scale 1 ..

 

Precision CNC Hardened Steel Main Shaft w/ Collar (GOLD) - BLADE 120 S / S2

MH-120S266S
(0)
$11.99

Precision CNC Hardened Steel Main Shaft w/ Collar set was to optimize for weight, stability and durability of the BLADE 120 S / S2 helicopter. The new upgrade product is equipped with aluminum and hardened steel, to produce tight and accurate tolerances throughout the part. Included:1 x Hardened Steel Main Shaft w/ Co..

 
Pre-Order

Airbrush Fiberglass Hughes 300 Scale /w Landing Gear - OMP Hobby M2 V2 / EXP

MH-M2EX-SH31
(0)
$79.99

The Airbrush Fiberglass Hughes 300 Scale design creates a super sharp overall appearance, which not only adds a cool new look to your OMP Hobby M2 V2 / EXP helicopter, but also significantly aids in high visibility from airbrush fiberglass shell. Included:1 x Airbrush Fiberglass Hughes 300 Scale2 x Aluminum Canopy Mount1 x ..

 
 
 
 
 
Pre-Order

Aluminum Main Blade Grip w/ Thrust Bearing (RED) - OMP Hobby M1

MH-OMM1102
(0)
$27.99

The design of the Aluminum Main Blade Grip with Thrust Bearing was to optimize for rigidity, stability, durability and overall performance of the OMP Hobby M1 helicopter. It is directly replaced the stock main blade grip. The new upgrade product is designed with Thrust Bearing in the inner side of the Aluminum Main Blade Grip, to increase Spind..

 

Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set (GOLD) - OMP Hobby M1

MH-OMM1225
(0)
$19.99

Included: 1 x Aluminum Carbon Fiber Tail Motor Mount W/ Fin Set   Weight: 1.44g   Usage: Use for OMP Hobby M1   Requires: Read and follow the Assembly Instruction carefully Loctite (#242 is recommended) is required to apply to all mechanical ..

 
Pre-Order

Airbrush Fiberglass Hughes 300 Scale /w Landing Gear - BLADE 450X / 330X / 330S

MH-330X-SH31
(0)
$149.99

Airbrush Fiberglass Hughes 300 Scale /w Landing Gear design creates a super sharp overall appearance, which not only adds a cool new look to your BLADE 450X / 330X / 330S helicopter, but also significantly aids in high visibility from airbrush fiberglass shell.   Included: 1 x Airbrush Hughes 300 Scale ..

 

Carbon Fiber 3 Blade Propeller 65mm Tail Blade - OMP Hobby M2 V1 / V2 / EXP

MH-M2EX050C
(0)
$8.99

The Carbon Fiber 3 Blade Propeller 65mm Tail Blade is designed with 65mm tail blade length to provide snappy tail response. It will be your an integral part of your OMP Hobby M2 V1 / V2 / EXP helicopter, but it also has the benefits and performance increase to match.  Included: 1 x Carbon Fibe..

 
 
 
 
 
 
 
 

RC Servo Converter JR Plug Female to Micro JST Male

MH-JRF-MJM
(0)
$6.99

  Quantity per package: 3pcs Total length: 85mm..

 

Precision HV Micro Servo Full Metal Gear Set w/ Converter Cables - BLADE 230S Smart

MH-DS008HVTC
(0)
$89.99

Specification Motor Type: Coreless Motor Gear Type: Metal Gear Voltage: 5V - 6V Torque: 47.22oz.in (3.4kg/cm) @ 6V Speed: 0.07sec / 60o@6V Size (L x W x H): 0.47 x 0.9 x 1.1in / 12 x 23 x 27.5mm Frequence: 1500µs / 333Hz Weigth: 0.71oz / 20g) Connector Wire Length: 150mm (+ - 5 mm) Included: 3 x Servo ..

 
 

Carbon Fiber Main Blades 185mm - OMP Hobby M2 V2 / EXP

MH-M2EX003
(0)
$24.99

  Included: 1 pair Carbon Fiber Main Blade 185mm Material: 3K Carbon Fiber Weight: 15g (+-0.5) / pair Usage: Use for OMP Hobby M2 V1 / V2 / EXP..

 
 
 
 
 
 
 

Plastic Main Blade 126mm (GREEN) - OMP HOBBY M1

MH-OMM1003GR
(0)
$6.49

..

 
Showing 1 to 48 of 4870 (102 Pages)